Panasonic KX-HCM280A User Manual

Installation/Troubleshooting

26

To allow access from the Internet with a router not supporting UPnP™, follow the 
procedures below.

Select [Static] on the Network (IPv4) page.

Enable port forwarding on the router.

Using the IP address and port number note written on step 1-(3), enable port 
forwarding on the router. See the router manual for how to enable port 
forwarding.

Register with the Viewnetcam.com service.

The port forwarding feature is required to allow access from the Internet with a 
router not supporting UPnP™. It exchanges a local IP address to a global one. 
Each camera must be assigned a unique port number.

(1)

Access the camera (see page 11 of the Operating Instructions on the 
Setup CD-ROM).

(2)

Click [Setup] tab at the top of the page.

(3)

Select [Static] on the Network page.
•

The Static IP Address Configuration page is displayed. Make a 
note of the IP address and port number, since they are required to 
enable port forwarding on the router.

(4)

Click [Save] without changing the settings.

(5)

Click [Restart].

*1

"Port forwarding" may be called "Address translation", "Static IP Masquerade", "Virtual server" 

or "Port mapping" in other products.

Global IP address 
of the router

vvv.xxx.yyy.zzz:80

vvv.xxx.yyy.zzz:81

vvv.xxx.yyy.zzz:80      192.168.0.253:80
vvv.xxx.yyy.zzz:81      192.168.0.252:81

Port No.

Local IP address

The IP addresses shown above may differ from those offered on your home network.

192.168.0.1

192.168.0.252

Port No. 81

192.168.0.253

Port No. 80

Router

Modem

CATV

xDSL
Optical cable

kxhcm280ait.book  26 ページ  ２００５年３月９日　水曜日　午後１時２３分