Panasonic KX-TDA15 User Manual

1.7 Setting the Telephone According to Your Needs

User Manual

1.7.2

Refusing Incoming Calls (Do Not Disturb [DND])

You may set this feature when you are in a meeting or busy.

To set/cancel

•

When using a proprietary telephone, you can set or cancel Do Not Disturb by pressing the
FWD/DND button (fixed button) instead of " 710".

•

The FWD/DND button light shows the current status as follows:
Off: Both features are not set.
Red on: FWD mode
Flashing red slowly: DND mode

•

The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.

(1)

When in the FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting
as shown below:

(2)

When in the FWD/DND Setting Mode:
Pressing the FWD/DND button (fixed button) while in idle status will take you directly
to the programming mode for the FWD/DND setting.
(Refer to "3.1.2 Settings on the Programming Mode".)

Note
A FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.

•

If your extension has set this feature, a calling extension will hear DND tone.

•

If this feature is set, the Call Forwarding (FWD) feature does not work.

•

Specified extensions can override this feature and call DND extensions (DND Override).

On-hook.

Enter 1 to set
or 0 to cancel.

PT/SLT/PS

Set

Cancel

Off-hook.

Enter 71.

Both Calls

Intercom Calls

Outside Calls

Enter 0 to 2 as you desire.

C.Tone

FWD

DND

Off