Panasonic KX-MB2025EX User Manual

Page of 124
2.8 Date and time
We recommend you to set the date and time. The other
party will receive your unit’s date and time as the header
information.
MFNMEN
MSetN
MMenuN
MFaxN
* The pictured model is KX-MB2025/KX-MB2030.
1
MMenuN A MBNM1NM0NM1N A MSetN
2
Enter the current date/month/year by selecting 2
digits for each.
Example: 3 August, 2010
M0NM3N M0NM8N M1NM0N
3
Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1. 
M1NM0N M1NM5N
2. Press MGN repeatedly to select “PM”.
Press MGN repeatedly to select “AM” or “PM”, or
24-hour time entry.
4
MSetN
5
Press MMenuN to exit.
Note:
R To check the current date and time setting, press
MFaxN to temporarily change the unit to the fax mode
(KX-MB2025/KX-MB2030 only).
R Your unit’s date and time will be used as the header
information for the following:
– When sending as an attached file to an email
destination directly from this unit (Scan to email
address) (page 32) (KX-MB2000/KX-MB2010/
KX-MB2030 only).
KX-MB2030 only).
R If the date and time is not set correctly, the other party
will receive an incorrect date and time as their
header. This may confuse the other party.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Caller ID service
(KX-MB2025/KX-MB2030 only)
The date and time will be automatically set according to
the received caller information.
R To use this feature, make sure the time adjustment
is set to “AUTO” (feature #226 on page 60).
R If the time has not previously been set, Caller ID will
not adjust the clock.
22
2. Preparation