Panasonic KX-MB2025EX User Manual

You can print documents, scan documents, receive
faxes or send faxes (KX-MB2030 only) using a computer
connected to the LAN. To enable these features, you
need to set the IP address, subnet mask, and default
gateway in the unit.

Important:
R Consult your network administrator when setting

Your situation:
– When only one unit is connected to the LAN.
If your network administrator manages the network with
a DHCP (Dynamic Host Configuration Protocol) server,
it will automatically assign an IP (Internet Protocol)
address, subnet mask, and default gateway to the unit.

After connecting the LAN cable to the unit and the
computer, turn the power switch ON.
R The IP address, subnet mask, and default

gateway will be set automatically.

Install Multi-Function Station on the computer that
you want to use it with. See page 25 for details.

Note:
R You can connect two or more units and assign IP

addresses automatically with a DHCP server, but we
recommend assigning static IP addresses manually
for each unit to avoid network access and
configuration troubles.

Your situation:
– When your network administrator does not manage

the network with a DHCP server.

– When two or more units are connected to the LAN.
You need to assign an IP address, subnet mask, and
default gateway manually.

MMenuN

Press MBNM5NM0NM0N to display “DHCP”.

Press M0N to select “DISABLED”. A MSetN

Set each item.
For the IP address:
1. Press M5NM0NM1N to display “IP ADDRESS”. A

MSetN

2. Enter the IP address of the unit. A MSetN

For the subnet mask:
1. Press M5NM0NM2N to display “SUBNET MASK”.

A MSetN

2. Enter the subnet mask of the network. A MSetN

For the default gateway:
1. Press M5NM0NM3N to display “DEFAULT

GATEWAY”. A MSetN

2. Enter the default gateway of the network. A

MSetN

Press MMenuN to exit.

Install Multi-Function Station on the computer that
you want to use it with. See page 25 for details.

To correct a mistake in the IP address, subnet mask,
or default gateway
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.

You need to select the computer that will be used for
receiving faxes.

Important:
R Make sure the PC fax setting is set to “ALWAYS”

R Make sure the fax preview mode is turned OFF

MMenuN A MBNM4NM4NM3N A MSetN

Press MCN or MDN repeatedly to select the desired
computer. A MSetN

Press MMenuN to exit.

Note:
R If the unit is not connected to the LAN, the computer

connected to the unit by USB is assigned as the
default computer for PC fax reception.

R To select the desired computer easily, change the PC

name beforehand (page 27).

24