Panasonic kx-tcd280fx User Manual
Handset Settings
25
Time settings
Alarm
An alarm will sound for 3 minutes at the set time
once or daily. Set the date and time beforehand
(page 13).
once or daily. Set the date and time beforehand
(page 13).
1
Press {j/OK}.
2
Select “Handset Setup”, then press {>}.
3
Select “Time Settings”, then press {>}.
4
Select “Alarm”, then press {>} 2 times.
5
Select an alarm mode, then press {>}.
– “Once”: The alarm will sound once at the
– “Once”: The alarm will sound once at the
set time. Enter the desired day and month
by selecting 2 digits for each.
by selecting 2 digits for each.
– “Daily”: An alarm will sound daily at the
set time.
– “Off”: Turns the alarm off. Press {>}
again, then press {ih} to finish.
6
Enter the desired hour and minute by
selecting 2 digits for each.
selecting 2 digits for each.
L
You can select “AM”, “PM” or 24-hour time
entry by pressing {*} repeatedly.
entry by pressing {*} repeatedly.
7
Press {j/OK}.
8
Select the ringtone that will sound at the set
time, then press {>}.
time, then press {>}.
9
Select “Save”, then press {>}.
10
Press {ih}.
Note:
L
To stop the alarm, press any dial key.
L
When in talk or intercom mode, the alarm will
not sound until the call has ended.
not sound until the call has ended.
L
The alarm will sound at the set time even when
the ringer volume is turned off.
the ringer volume is turned off.
L
If you select “Once”, the setting will change to
“Off” after the alarm sounds.
“Off” after the alarm sounds.
Ringer setup
Ringer volume
1
1
Press {j/OK}.
2
Select “Handset Setup”, then press {>}.
3
Select “Ringer Setup”, then press {>}.
4
Select “Ringer Volume”, then press {>}.
5
Press {e} or {v} repeatedly to select the
desired volume.
desired volume.
6
Press {>}.
7
Press {ih}.
To turn off the ringer
1
Follow steps 1 to 4 under “Ringer volume”,
page 25.
page 25.
2
Press {v} repeatedly until “Off” is
displayed.
displayed.
3
Press {j/OK}.
Note:
L
Alarms will sound and the handset will ring for
intercom calls and when paged even if the
ringer is turned off.
intercom calls and when paged even if the
ringer is turned off.
L
When the ringer is turned off, “Ring Off” is
displayed.
displayed.
Changing ringtones
You can change the ringtone used by the
handset.
“Ext. Ringtone”: Selects the ringtone for
outside calls.
“Int. Ringtone”: Selects the ringtone for
intercom calls.
handset.
“Ext. Ringtone”: Selects the ringtone for
outside calls.
“Int. Ringtone”: Selects the ringtone for
intercom calls.
1
Press {j/OK}.
2
Select “Handset Setup”, then press {>}.
3
Select “Ringer Setup”, then press {>}.
4
Select the desired item, then press {>}.
5
Select the desired ringtone, then press {>}.
6
Press {ih}.