Panasonic kx-tcd224e User Manual
Useful Information
61
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Telephone
Problem
Cause & solution
I cannot make or receive calls.
L
The AC adaptor or telephone line cord is not
connected. Check the connections.
connected. Check the connections.
L
If you are using a splitter to connect the unit,
remove the splitter and connect the unit to the wall
socket directly. If the unit operates properly, check
the splitter.
remove the splitter and connect the unit to the wall
socket directly. If the unit operates properly, check
the splitter.
L
Disconnect the base unit from the telephone line
and connect the line to a known working telephone.
If the working telephone operates properly, contact
our service personnel to have the unit repaired. If
the working telephone does not operate properly,
contact your service provider.
and connect the line to a known working telephone.
If the working telephone operates properly, contact
our service personnel to have the unit repaired. If
the working telephone does not operate properly,
contact your service provider.
L
The call bar feature is turned on. Turn it off (page
28).
28).
L
You dialled a call restricted number (page 33).
L
The key lock feature is turned on. Turn it off (page
15).
15).
The unit does not ring.
L
The ringer volume is turned off. Adjust the handset
ringer volume (page 25) and the base unit ringer
volume (page 31).
ringer volume (page 25) and the base unit ringer
volume (page 31).
L
The batteries should be charging
but the battery icon does not
change.
but the battery icon does not
change.
L
Clean the charge contact and charge again (page
11).
11).
L
The AC adaptor is disconnected. Plug in the AC
adaptor.
adaptor.
A busy tone is heard when {C} is
pressed.
pressed.
L
The handset is too far from the base unit. Move
closer and try again.
closer and try again.
L
Another handset is on an outside call. Wait for the
other user to complete the call.
other user to complete the call.
Static is heard, sound cuts in and
out. Interference from other
electrical units.
out. Interference from other
electrical units.
L
Locate the handset and the base unit away from
other electrical appliances.
other electrical appliances.
L
Move closer to the base unit.
L
Your unit is connected to a telephone line with DSL
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.
service. We recommend connecting a filter (contact
your DSL service provider) to the telephone line
between the base unit and the telephone line jack.
The handset stops working while
being used.
being used.
L
Disconnect the AC adaptor and turn off the
handset. Connect the AC adaptor, turn on the
handset and try again.
handset. Connect the AC adaptor, turn on the
handset and try again.
TCD210220E(e-e).book Page 61 Tuesday, January 18, 2005 9:44 AM