Panasonic kx-tcd953 User Manual
19
Chapter 2
Basic Operations
1
Enter a phone number.
•
The entered number is displayed.
•
If you misdial, press
. Digits are
erased from the right.
•
To cancel, press
firmly.
2
Press .
•
After a few seconds, the display will start
showing the length of the call.
showing the length of the call.
3
To hang up, press
or place the
handset on the base unit.
•
The handset will return to the stand-by
mode.
mode.
C
C
Making Calls
1
Press .
2
Dial a phone number.
•
The dialled number is displayed.
•
After a few seconds, the display will start
showing the length of the call.
showing the length of the call.
•
If “ ” flashes and an alarm tone sounds
after pressing
after pressing
, move closer to the
base unit. Then try again.
•
If busy tones sound after pressing
to
make a call, the base unit speakerphone or
another handset is in use.
another handset is in use.
•
You can choose whether to display the length
of the call or phone number in the talk mode
by programming (p. 38).
of the call or phone number in the talk mode
by programming (p. 38).
3
To hang up, press
or place the
handset on the base unit.
•
The handset will return to the stand-by
mode.
mode.
Make sure that the power is ON (p. 14).
i2345678
8888
00-00-00
To dial after confirming
the entered number
the entered number
With the Handset
To select the receiver volume
3 levels (HIGH, MEDIUM, LOW) are available.
The factory preset is MEDIUM.
The factory preset is MEDIUM.
While talking, press
F
or
G
to select
the desired level.
•
After a few seconds, the display will return to
the length of call.
the length of call.
OR
In the stand-by mode, proceed as follows.
1
Press .
2
Press
G
or
F
until “
F6
” is displayed,
then press
.
•
The current level is displayed.
3
Press
F
or
G
to select
the desired level.
4
Press .
PROG
OK
PROG
Ex. LOW is selected.
F6
Ex. LOW is selected.
KX-TCD953EB(019~031) 4.25.2000 1:53 PM Page 19