Panasonic KX-TDA600 User Manual

1.3 Telephone Features and Operation

Operating Manual

1.3.11 Call Transfer

–

Transferring to an Extension in the PBX

–

Transferring to an Outside Party Using the PBX Service

Transferring to an Extension in the PBX

To transfer

•

You can transfer a held call without talking, and go on-hook even if the transferred party does
not answer the call.
If a transferred call is not answered within a specified time, it will ring at a preprogrammed
extension, if set, or at your extension again. If you are off-hook at that time, you will hear an
alarm tone. If an outside call is not answered within a specified time, it is automatically
disconnected.

•

When you are not at your desk or not in the office and receive a forwarded outside call, for
example on your cellular phone, it is possible to transfer the call to an extension in the PBX
by pressing # + desired extension number (if enabled through system programming).

•

For the transfer operation using an SDN button, refer to "1.3.49 PDN (Primary Directory
Number)/SDN (Secondary Directory Number) Extension (KX-TDA100/KX-TDA200/KX-
TDA600 only)".

Press DSS or dial
extension number.

On-hook.

Talk.

During a conversation

You do not have to inform the destination
extension about where the call has been
transferred from. This can be disregarded.

PT/PS

Press TRANSFER.

extension no.

(DSS)

TRANSFER

C.Tone

Dial extension
number.