Panasonic kx-tg8120fx User Manual
Preparation
9
Connections
When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
base unit, a short beep will be heard. If it is
not heard, check the connections.
Note:
L
Never install telephone wiring during a
lightning storm.
lightning storm.
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
at all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
Location
L
For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
other phones.
– in a convenient, high and central
location.
Battery
installation/replacement
installation/replacement
Important:
L
L
When replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 4, 5.
using the Panasonic rechargeable
batteries noted on page 4, 5.
1
Press the notch on the handset cover
firmly and slide it in the direction of the
arrow.
firmly and slide it in the direction of the
arrow.
L
When replacing batteries, remove the
old batteries positive (S) terminal first.
old batteries positive (S) terminal first.
2
Insert the batteries negative (T)
terminal first. Close the handset cover.
terminal first. Close the handset cover.
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging, i and battery strength
icon are alternately shown on the display.
When the batteries are fully charged, 1
remains on the display.
about 7 hours before initial use.
When charging, i and battery strength
icon are alternately shown on the display.
When the batteries are fully charged, 1
remains on the display.
L
The charge indicator lights up when the
handset is placed on the base unit.
handset is placed on the base unit.
Use only the included AC adaptor
and telephone line cord.
and telephone line cord.
Hook
(220–240 V, 50 Hz)
To telephone
network
network
TG8100-8120FX(e).book Page 9 Wednesday, August 9, 2006 3:13 PM