Panasonic kx-tg8090e User Manual
Useful Information
31
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Error messages
*1 KX-TG8090/KX-TG8092/KX-TG8093
Status messages
*1 KX-TG8090/KX-TG8092/KX-TG8093
Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit AC
adaptor and remove the handset batteries. Then reconnect the base unit AC adaptor and install the
batteries.
adaptor and remove the handset batteries. Then reconnect the base unit AC adaptor and install the
batteries.
Telephone
Error message
Cause & solution
L
Erase unnecessary messages (page 24).
Busy
L
Intercom call failed (the other handset cannot be found or
is on an outside call). Try again later.
is on an outside call). Try again later.
L
Another handset is being used. Try again later.
L
Cancelling a handset failed. Try again (page 27).
No Base Found
L
Handset registration failed (page 27). Try again.
SMS Full
L
SMS Transf.Fail.
L
The message failed to be sent. Try again (page 21).
Wrong PIN!
L
Insert the correct base unit PIN. If you forget your base
unit PIN, consult your nearest Panasonic service centre.
unit PIN, consult your nearest Panasonic service centre.
L
You entered the wrong remote access code in step 5,
“Turning remote operation on”, page 25. Try again.
“Turning remote operation on”, page 25. Try again.
Status message
Meaning
-Answering-
L
The unit answers a call, callers are greeted by a greeting
messages.
messages.
L
The answering system is being used remotely.
L
The base unit or other handset(s) are operating the
answering system.
answering system.
L
The answering system is being used remotely.
Problem
Cause & solution
w
is flashing and “Register!” is
shown on the handset display.
L
The handset is cancelled. If you want to register the
handset to the base unit(s), follow “Registering a handset
to a base unit”, page 27. If you want to use a base unit(s)
which was registered to the handset before cancellation,
select it by following “Selecting a base unit”, page 27.
handset to the base unit(s), follow “Registering a handset
to a base unit”, page 27. If you want to use a base unit(s)
which was registered to the handset before cancellation,
select it by following “Selecting a base unit”, page 27.
TG8070-8090E(e).book Page 31 Monday, June 11, 2007 8:12 PM