Panasonic kx-tg7210e User Manual

13

When the batteries are fully charged, 
“Charge Completed” will be 
displayed.

*1 The pictured model is KX-TG7210.
*2 KX-TG7212/KX-TG7213/

KX-TG7214/KX-TG7232/
KX-TG7233/KX-TG7234

Note:
L

It is normal for the handset to feel 
warm during charging.

L

If you want to use the unit 
immediately, charge the batteries for 
at least 15 minutes.

L

Clean the charge contacts of the 
handset, base unit, and charger with a 
soft, dry cloth once a month. Clean 
more often if the unit is subject to the 
exposure of grease, dust, or high 
humidity.

Note:
L

It is normal for batteries not to reach 
full capacity at the initial charge. 
Maximum battery performance is 
reached after a few complete cycles of 
charge/discharge (use).

L

Actual battery performance depends 
on a combination of how often the 
handset is in use and how often it is 
not in use (standby).

L

Even after the handset is fully 
charged, the handset can be left on 
the base unit or charger without any ill 
effect on the batteries.

L

The battery level may not be 
displayed correctly after you replace 
the batteries. In this case, place the 
handset on the base unit or charger 
and let it charge for at least 7 hours.

Press {ih} for about 1 second.

Press {ih} for about 2 seconds.

5

High

6

Medium

7

Low
L

When flashing: 
Needs to be 
charged.

In continuous use

15 hours max.

In continuous 
standby mode

160 hours 
max.

TG7210-7230E(e).book  Page 13  Tuesday, October 16, 2007  12:59 PM