Panasonic MC-V5268 User Manual

- 11 -

Voltaje

Protector termal

Extensión de cordón

Herramientas

9.1 A / 9,1 A

9,1 m (30 pi)

Power

Thermal Protector

Cord Length

Tools

120V AC(60Hz)

Yes

9.1 m (30 Ft.)

Yes

Alimentation

Protecteur thermique Longueur du cordon

Accessoires

120 V c.a. (60 Hz)

Oui

9,1 m (30 pi)

Oui

FEATURE CHART

Diagrama de características

Tableau des caractéristiques

BEFORE REQUESTING SERVICE

WARNING

Electric Shock or Personal Injury Hazard.

Disconnect the electrical supply before servicing or cleaning the unit. Failure to do
so could result in electric shock or personal injury from cleaner suddenly starting.

- 38 -

Review this chart to find do-it-yourself solutions for minor performance
problems. Any service needed, other than those described in these
Operating Instructions, should be performed by an authorized service
representative.

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

Cleaner will

1. Unplugged at wall outlet.

1. Plug in firmly. Push ON-OFF

not run.

switch to ON.

2. ON-OFF switch not turned on.

2. Push ON-OFF switch to ON.

3. Tripped circuit breaker/blown

3. Reset circuit breaker or replace

fuse at household service panel.

fuse.

4. Tripped thermal protector.

4. Unplug vacuum, wait thirty (30)

minutes, plug in and switch to ON.

Poor job of dirt

1. Full or clogged dust bag.

1. Change dust bag.

pickup.

2. Broken belt.

2. Replace belt.

3. Clogged hose or nozzle.

3. Clean hose or nozzle area.

4. Hose not inserted fully.

4. Insert hose.

5. Worn agitator.

5. Replace agitator.

6. Hole in hose.

6. Replace hose.

7. Dust cover improperly installed.

7. Properly install dust cover.

8. Belt not installed on motor shaft.

8. Install belt on motor shaft.

Dust escapes

1. Bag improperly installed.

1. Properly install bag.

the paper bag.

2. Bag torn.

2. Replace bag.

Light will

1. Burned out light bulb.

1. Replace light bulb.

not work.