Panasonic nv-hv22gn User Manual
6
Manual Tuning Procedure
If the VCR is not correctly tuned by Auto Tuning, follow the
procedure below.
procedure below.
1 Press [MENU]
(9) to display the Main menu on the TV
screen.
2 Press [
43] (28) to select [TUNER PRESET] then
press [ENTER]
(26).
3 Press [
43] (28) to select [CH] then select the channel
number you want to tune by pressing [
2 1] (28).
4 Confirm that [CLEAR] is set to [OFF].
5 Press [
43] (28) to select [SEARCH] then press [2 1]
(28) to start the Manual Tuning.
• If the desired TV station has not been tuned, press [
2 1]
(28) again.
• Press [MENU]
(9) and repeat steps 3-5 for each
programme position you want to tune to a station.
6 Press [MENU]
(9) three times to exit the On Screen
Display.
Direct Tuning
Follow steps 1 to 4 of Manual Tuning Procedure.
5 Press [43] (28) to select [SEARCH].
6 Press [Numeric] (3) to enter the number of the desired
5 Press [43] (28) to select [SEARCH].
6 Press [Numeric] (3) to enter the number of the desired
programme position.
• For other channels that require tuning, repeat steps 3, 4,
• For other channels that require tuning, repeat steps 3, 4,
5, 6.
7 Press [MENU] (9) twice to exit the On Screen Display.
Fine Tuning Procedure
Follow steps 1 to 4 of Manual Tuning Procedure.
5 Press [
43] (28) to select
[FINE] then press [
2 1] (28) to
obtain the best tuning condition.
• Press [ENTER]
• Press [ENTER]
(26) to return the
tuning to its former state.
6 Press [MENU]
(9) to exit the On
Screen Display.
Blanking of Unused Programme Positions
Follow steps 1 to 3 of Manual Tuning Procedure.
4 Press [43] (28) to select [CLEAR] then press
4 Press [43] (28) to select [CLEAR] then press
[
2 1] (28) to select [ON].
• Repeat steps 3,
4 for other unused programme positions
to skip during the selection of programme positions.
• To cancel the blanking of a programme position, select
that programme position then set [CLEAR] to [OFF].
5 Press [MENU] (9) twice to exit the On Screen Display.
Setting the Clock of Your VCR
In the event of a power failure, the clock will operate on its
back up system for a minimum of 3 years. After 3 years, clock
back up in the event of a power failure can only be
guaranteed for maximum of 1 hour.
back up system for a minimum of 3 years. After 3 years, clock
back up in the event of a power failure can only be
guaranteed for maximum of 1 hour.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
Operations
1 Press [MENU]
1 Press [MENU]
(9) to display the
Main menu on the TV screen.
2 Press [
43] (28) to select [CLOCK
SET] then press [ENTER]
(26).
3 Set each item by pressing
[
2 1 4] (28). Press [3] (28) to
return to the previous item.
At the set time (TIME) point:
• When [
• When [
2 1] (28) is kept pressed,
the indication changes in 30-minute
steps.
steps.
4 Press [MENU]
(9).
• The clock starts.
Time Reset Function
If the clock is less than 2 minutes slow or fast, it can easily be
reset to the proper time.
reset to the proper time.
Example:
Resetting the clock to 12:00
Resetting the clock to 12:00
1 Press [MENU]
(9) to display the Main menu on the TV
screen.
2 Press [
43] (28) to select [CLOCK SET] then press
[ENTER]
(26).
3 When the current clock displays on the VCR is
between 11:58 and 12:01, press [MENU]
(9) as soon as
you see the 12:00. This resets the time to 12:00.
CH 2
END: MENU
CH 2
SEARCH 74
END: MENU
SEARCH
CH 2
AFC: ENTER
FINE
:
END: MENU
CLOCK SET
START: MENU
SELECT:
YEAR
MONTH
DATE
TIME
MONTH
DATE
TIME
2005
1 [SA]
1
0:00
MENU
SELECT
END
END
: , ENTER
:MENU
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
0
PROG.
MENU
SELECT
END
END
: , ENTER
:MENU
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
0
PROG.
SP
SP
CLK
LSQT0879.book 6 ページ ２００５年２月２３日 水曜日 午後８時４９分