Panasonic PT-AR100U User Manual
[OPTION] menu
ENGLISH
- 65
Settings
[TRIGGER 1/2 SETTING]
You can set the function for each trigger terminal.
Attention
Make sure the <MAIN POWER> switch of the projector
z
is turned <OFF> before a cable is connected to or
disconnected from a trigger terminal.
[OUTPUT]
■
In conjunction with projector operation set in the [TRIGGER
1 SETTING]/[TRIGGER 2 SETTING] menu, a trigger
output signal is sent to an external device with a trigger
terminal to enable control.
1 SETTING]/[TRIGGER 2 SETTING] menu, a trigger
output signal is sent to an external device with a trigger
terminal to enable control.
[INPUT]
■
Receipt of a trigger input signal from an external device
enables control of projector operation setup in the
[TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu.
enables control of projector operation setup in the
[TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu.
ON-SCREEN DISPLAY
BACK COLOR
STARTUP LOGO
AUTO SEARCH
HDMI SIGNAL LEVEL
FRAME RESPONSE
PROJECTION METHOD
BACK COLOR
STARTUP LOGO
AUTO SEARCH
HDMI SIGNAL LEVEL
FRAME RESPONSE
PROJECTION METHOD
TRIGGER 1 SETTING
TRIGGER 2 SETTING
HIGH ALTITUDE MODE
LAMP POWER
ECO MANAGEMENT
FUNCTION BUTTON
VIERA LINK SETTINGS
HIGH ALTITUDE MODE
LAMP POWER
ECO MANAGEMENT
FUNCTION BUTTON
VIERA LINK SETTINGS
BLUE
ON
ON
NORMAL
NORMAL
FRONT/DESK
OFF
OFF
OFF
NORMAL
ON
ON
NORMAL
NORMAL
FRONT/DESK
OFF
OFF
OFF
NORMAL
PICTURE
POSITION
LANGUAGE
OPTION
1/2
Use the ▲▼ buttons to select [TRIGGER
1)
1 SETTING] or [TRIGGER 2 SETTING] and
press the <ENTER> button.
The [TRIGGER SETTING] menu is displayed.
z
TRIGGER 1 SETTING
OFF
OUTPUT
POWER ON
SCREEN AREA MEMORY 1
SCREEN AREA MEMORY 2
SCREEN AREA MEMORY 3
SCREEN AREA MEMORY 4
SCREEN AREA MEMORY 5
SCREEN AREA MEMORY 6
BLANK
DELAY TIME
INPUT
POWER ON/OFF
POWER ON
SCREEN AREA MEMORY 1
SCREEN AREA MEMORY 2
SCREEN AREA MEMORY 3
SCREEN AREA MEMORY 4
SCREEN AREA MEMORY 5
SCREEN AREA MEMORY 6
BLANK
DELAY TIME
INPUT
POWER ON/OFF
SELECT 4:3 ASPECT
SELECT 16:9 ASPECT
SELECT S16:9 ASPECT
SELECT JUST ASPECT
SELECT ZOOM ASPECT
SELECT H-FIT ASPECT
SELECT V-FIT ASPECT
RS-232C COMMAND LINK
0 SEC.
SELECT 16:9 ASPECT
SELECT S16:9 ASPECT
SELECT JUST ASPECT
SELECT ZOOM ASPECT
SELECT H-FIT ASPECT
SELECT V-FIT ASPECT
RS-232C COMMAND LINK
0 SEC.
BLANK
PICTURE
POSITION
LANGUAGE
OPTION
Press the ▲▼◄► buttons to select
2)
the input/output function and press the
<ENTER> button.
Function settings
z
[OFF]
Unable to transmit the
trigger output signal. Does
not function even if trigger
input signal is received.
(Trigger input signal can
be received.)
Output
z
[POWER ON]
[SELECT 4:3
ASPECT]
[SCREEN AREA
MEMORY 1]
[SELECT 16:9
ASPECT]
[SCREEN AREA
MEMORY 2]
[SELECT S16:9
ASPECT]
[SCREEN AREA
MEMORY 3]
[SELECT JUST
ASPECT]
[SCREEN AREA
MEMORY 4]
[SELECT ZOOM
ASPECT]
[SCREEN AREA
MEMORY 5]
[SELECT H-FIT
ASPECT]
[SCREEN AREA
MEMORY 6]
[SELECT V-FIT
ASPECT]
[BLANK]
[RS-232C COMMAND
LINK]
When the item which is set in the [TRIGGER
1 SETTING]/[TRIGGER 2 SETTING] menu is
chosen or executed in the projector, 12 V is output
from a trigger terminal.
Note
When [AUTO] is selected in the [ASPECT] menu of
z
[POSITION], video is automatically displayed using either
4:3 or 16:9 aspect ratio depending on the input signal,
so if this aspect ratio matches the settings made in
[TRIGGER 1 SETTINGS] or [TRIGGER 2 SETTINGS] 12
V is output.
[BLANK]
•
When [BLANK] is activated, output is 12 V. If the
setting is released, output is 0 V.
[RS-232C COMMAND LINK]
[RS-232C COMMAND LINK]
•
Receives commands (
page 88) from external
device and outputs 12 V.