Panasonic PT-AX200E User Manual

1. Switch on the connected devices.

 

Press the play button of the required device.

2. Press the INPUT SELECT button to select the 

required input method if needed. See “Switching 
the input signal” on page 26.

 

The image will be projected on the screen.

1. Press the ASPECT button to select the required 

aspect mode. See “Switching the aspect ratio” on 
page 23.

2. Adjust the projected image with the lens shift 

levers. See “Lens shift and positioning” on 
page 16.

3. Adjust the angle of the projector.

 

Screw down the front leg adjusters and adjust the 
angle vertically.

 

4. Adjust the focus and the projected image size.

 

Turn the focus ring and zoom ring to adjust.

 

You can confirm the result with TEST PATTERN. 
See “TEST PATTERN” on page 39.

• AUTO SEARCH is ON as default and the signal from 

the connected devices is detected automatically. See 
“AUTO SEARCH” on page 38.

• Do not touch the air exhaust port as this may cause 

burns or injury.

• If keystone distortion occurs, see “KEYSTONE” on 

• If you adjust the focus, you may need to adjust the size 

of the image again.

Focus ring

Zoom ring

http://www.pureglare.com.au