Panasonic UB-7325 User Manual

■ Panaboard Operation Panel

It is possible to perform the same operations as with the electronic board control panel (page 9) from the following 
Panaboard Operation buttons.

• While the Panaboard Operation Panel is displayed, the Copy Key on the electronic board control panel is 

used for scanning images into the computer.

This lamp indicator notifies the user when the time to replace the 
thermal transfer film is approaching (estimated) and of the contrast used 
during scanning or copying.
Indicator off: 

Normal scanning or copying contrast

Indicator on: 

Darker than normal scanning or copying contrast

Indicator flashing*:

Almost time to replace the thermal transfer film
(Note that only about 15 more sheets may be 
copied when this indicator starts flashing.)
Replacement film (UG-6001) is separately 
available from the dealer where you purchased 
your unit.

Each time this button is pressed, the unit will alternate between normal 
and dark contrast modes (Normal/Dark).

This button scans the screen.

This indicator displays the number of copies to be made. The display 
changes each time the Multi-Copy/Stop Button is pressed.

Example: 1 

→  2 →  ··· →  9 →    → 1 →  ···

(Selecting “

” allows you to copy 4 screens continuously.)

When an error occurs, a flashing symbol will appear in this display to 
indicate the error status. (See page 27.)

When making multiple copies or copying 4 screens continuously, press 
this button until the desired number of copies or “

” is displayed on the 

Multi-Copy/Error Indicator. This button can also be pressed to stop 
copying while executing multiple copies or copying 4 screens 
continuously. 
• The display changes as shown below each time the screen is copied. 

After reaching 0, the display will reset to 1.

Example for multiple copies:
5 

→  4 →  3 →  2 →  1 →  0 →  1 (Number is counted down.)

Example for copying 4 screens continuously:

 

→    →    →   →  0 →  1 (Display changes.)

 for 

Clicking this button advances the screen from right to left.
Clicking this button twice advances two screens from right to left.

Clicking this button advances the screen from left to right.
Clicking this button twice advances two screens from left to right.