Panasonic UB-7320 User Manual

Set the power switch to on ( I ).

• “

” will flash on the Multi-Copy/Error 

Indicator when copy paper has run out.

• The screen will move to home position and 

stop.

Push the door open button and open the 
printer door.

• If there is any copy paper remaining in the 

copy paper compartment, remove it.

Open the printer door to position B and load 
the copy paper roll with smooth side facing 
up, then move the printer door to position A to 
prevent paper roll from falling.
(Loosen about 15 cm as shown and load it.)

• Use copy paper roll with a core diameter 

of 25.4 mm (1 inch) or more. Using a copy 
paper roll with a smaller core could cause 
paper jams.

Pass the paper over the paper feed roller and 
under the cutter cover, then through the output 
port about 4 cm.

Close the printer door securely, using two 
hands.

• Once the door is closed, paper will feed and 

automatically cut. Remove and discard the 
small piece of paper.

Load a new roll when:
• Red bands become visible at the edge of the copy 

paper.

• The Multi-Copy/Error Indicator flashes “

” even if 

the printer door is closed properly.

PUSH O

PEN

POW

ER

Copy paper 
compartment

PUSH OPEN

Door
Open
Button

A

B

Smooth side

Wrong direction

About 
15 cm

Paper feed  
roller

Cutter cover

About 4 cm