Panasonic UB-7320 User Manual

English

■ Control panel

This lamp indicator displays the printing contrast used during 
copying.
Indicator off: Normal printing contrast
Indicator on: Darker than normal printing contrast

Each time this key is pressed, the unit will alternate between 
normal and dark contrast modes (Normal/Dark).

This key causes the screen to be copied.

This indicator displays the number of copies to be made. The 
display changes each time the Multi-Copy/Stop Key is pressed.

Example: 1 

→  2 →  ··· →  9 →    → 1 →  ···

(Selecting “

” allows you to copy 4 screens continuously.)

When an error occurred, a flashing symbol will appear in this 
display to indicate the error status. (See page 24.)

When making multiple copies or copying 4 screens continuously, 
press this key until the desired number of copies or “

” is 

displayed on the Multi-Copy/Error Indicator. This key can also be 
pressed to stop copying while executing multiple copies or 
copying 4 screens continuously. 

• The display changes as shown below each time the screen is copied. After 

reaching 0, the display will reset to 1.

Example for multiple copies:
5 

→  4 →  3 →  2 →  1 →  0 →  1 (Number is counted down.)

Example for copying 4 screens continuously:

 

→    →    →   →  0 →  1 (Display changes.)

Pressing this key advances the screen from right to left.
Pressing this key twice advances two screens from right to left.
Pressing this key more than 2 seconds advances the screen to 
the projector screen with no ruled lines.

Pressing this key advances the screen from left to right.
Pressing this key twice advances two screens from left to right.
Pressing this key more than 2 seconds advances the screen to 
the projector screen with no ruled lines.