Panasonic UB-7320 User Manual

English

■ Panaboard Operation Panel

It is possible to perform the same operations as with the electronic board control panel (page 9) from the following 
Panaboard Operation buttons.

• While the Panaboard Operation Panel is displayed, the Copy Key on the electronic board control panel is 

used for scanning images into the computer.

This lamp indicator displays the contrast used during scanning or copying.

Indicator off:  Normal scanning or copying contrast
Indicator on:  Darker than normal scanning or copying contrast

Each time this button is pressed, the unit will alternate between normal 
and dark contrast modes (Normal/Dark).

This button scans the screen.

This indicator displays the number of copies to be made. The display 
changes each time the Multi-Copy/Stop Button is pressed.

Example: 1 

→  2 →  ··· →  9 →    → 1 →  ···

(Selecting “

” allows you to copy 4 screens continuously.)

When an error occurs, a flashing symbol will appear in this display to 
indicate the error status. (See page 24.)

When making multiple copies or copying 4 screens continuously, press 
this button until the desired number of copies or “

” is displayed on the 

Multi-Copy/Error Indicator. This button can also be pressed to stop copying 
while executing multiple copies or copying 4 screens continuously. 
• The display changes as shown below each time the screen is copied. 

After reaching 0, the display will reset to 1.

Example for multiple copies:
5 

→  4 →  3 →  2 →  1 →  0 →  1 (Number is counted down.)

Example for copying 4 screens continuously:

 

→    →    →   →  0 →  1 (Display changes.)

* If scanning, the setting 1 to 9 for the number of copies or “

” for 

Clicking this button advances the screen from right to left.
Clicking this button twice advances two screens from right to left.

Clicking this button advances the screen from left to right.
Clicking this button twice advances two screens from left to right.

This button causes the screen to be copied.