Panasonic wj-sx650p User Manual

50

Select ON or OFF to accept or not accept recorder alarm
input signals. (The factory default is OFF.)
ON: Accepts recorder alarm input signals.
OFF: Not accepts recorder alarm input signals.

Select ON or OFF to accept or not accept serial alarm input
signals. (The factory default is ON.)
ON: Accepts serial alarm input signals.
OFF: Not accepts serial alarm input signals.

Select ON or OFF to accept or not accept video loss input
signals. (The factory default is OFF.)
ON: Accepts video loss input signals.
OFF: Not accepts video loss input signals.

● TERMINAL ALARM Menu

Select a video input board from 1 to 8. (The factory default
is 1.)

Select the alarm contact type for each terminal alarm input
signal. (The factory default is N.O.)
N.O.: Normally Open contact
N.C.: Normally Close contact

■ RECORDER

You will check the settings of DATA ports to connect
recorders and CAMERA IN connectors to supply video
input signals from recorders. When you select RECORDER
on the top menu, the following menu is displayed.

Note: Before the settings, check the system composition

and refer to p. 30 Recorder Connection. 

Select the video input board or external monitor to supply
video input signals from recorders. Refer to p. 30 for con-
nections. (The factory default is EXTERNAL MONITOR.)
INPUT BOARD1 to 8: Recorder images are displayed on

monitors connected to the unit.

EXTERNAL MONITOR: Recorder images are displayed on

external monitors directly connected to recorders.

Select the desired recorder. 1 to 16 are Unit Address
(System) numbers set for recorders. (The factory default is
ON.)
ON: The recorder is used.
OFF: The recorder is not used.

DATA ports used for the recorder connections are dis-
played. DATA port setting is performed in the DATA PORT
menu. (Refer to p. 52.)

Camera input channel numbers to supply video input sig-
nals from recorders are displayed. (When RECORDER
OUTPUT is set to EXTERNAL MONITOR, "- -" is displayed.)

B

B