Panasonic wj-sx650p User Manual

52

■ SYSTEM

You will perform the system settings required to transmit
data between the unit and connected devices. When you
select SYSTEM on the top menu, the following menu is dis-
played.

● SYSTEM Menu

DATA PORT menu will be displayed. You will select the
DATA port types according to the connected devices.

Select the communication speed of SERIAL port. (The fac-
tory default is 38 400 bps.)
4 800 bps/9 600 bps/19 200 bps/38 400 bps

Other parameters (COMMUNICATION STATUS) are as fol-
lows. (Setting change is not available.)
Data bit: 8 (bits)
Parity check: NONE
Stop bit: 1 (bit)

VD2/DATA/CABLE COMPENSATION menu is displayed.
You will perform the settings for VD2, camera control signal
(DATA), and cable compensation.

RS485 CAMERA menu is displayed. You will set the RS-485
port numbers and unit numbers for the RS-485 cameras.

● DATA PORT Menu

Select the DATA port types according to the connected
devices.
TMNL1 to 8: Select this when using the DATA port for sys-

tem controller in the terminal mode.

PSD: Select this when using the DATA port for system con-

troller in the PS·Data mode.

HDR1 to 4: Select this when connecting a recorder to the

DATA port.

The available port settings are as follows.
DATA1: TMNL1 /PSD (The factory default is TMNL1.)
DATA2: TMNL2 (The factory default is TMNL2.)
DATA3: TMNL3/HDR1 (The factory default is HDR1.)
DATA4: TMNL4/HDR2 (The factory default is HDR2.)
DATA5: TMNL5 (The factory default is TMNL5.)
DATA6: TMNL6 (The factory default is TMNL6.)
DATA7: TMNL7/ HDR3 (The factory default is HDR3.)
DATA8: TMNL8/ HDR4 (The factory default is HDR4.)

Select the communication speed. (The factory default is 9
600 bps.)
4 800 bps/9 600 bps/19 200 bps

Parameters of COMMUNICATION STATUS are as follows.
(Setting change is not available.)
Data bit: 8 (bits)
Parity check: NONE
Stop bit: 1 (bit)

Note: When changing the communication speed, conform

the communication speed settings to that of the con-
nected devices.

O

O

O

B