Panasonic WV-CP160 User Manual

1. The following functions are built in.

(1) Auto Light Control (ALC)/Electronic Light Control (ELC)
(2) The SUPER-D2 function eliminates interference by strong background lighting

which makes the camera picture dark, such as a spotlight.
Dynamic range of 48 dB.

(3) Auto/Manual White Balance Function
(4) Electronic Shutter Function

2. Signal-to-noise ratio of 50 dB
3. Minimum illumination of 0.8 lx (0.08 footcandle) with F1.4 lenses.
4. Minimum illumination of 0.4 lx (0.04 footcandle) with Panasonic aspherical high speed

(F0.75) lenses.

5. 480 lines of horizontal resolution

To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside.  Ask a qualified service person for servicing.

Do not abuse the camera.  Avoid striking, shaking, etc.  The camera could be damaged
by improper handling or storage.

Turn the power off immediately and ask a qualified service person for servicing.
Moisture can damage the camera and also create the danger of electric shock.

Use a dry cloth to clean the camera when dirty.
In case the dirt is hard to remove, use a mild detergent and wipe gently.

q

This connector is used to connect the auto iris lens. It supplies power and DC control
signal to the auto iris lens.

w

This ring is used to adjust the back focal length or picture focus by rotating it.

e

r

This hole is used to mount the camera onto a mounting bracket.

t

y

This button is used to move the cursor downward.  It is also used to select items in the
CAM SET UP menu.

u

This button is used to move the cursor to the right.  It also selects the mode and can be
used to adjust some levels.

Open the panel to the upper left until it stops by rotating counterclockwise.

W

V

-

 

q

t

y

!3

!0

o

u

i

w

r

e

!5

!8

!1

!2

MONITOR OUT

NC

MIC OFF-ON

SOFT-SHARP

LOCK

!6

!7

!4