Panasonic wv-cm146 User Manual

-13-

■

CAMERA

VTR

INPUT

SELECT

ON

STAND BY

DISPLAY

MODE

COLOUR

BRIGHT

CONTRAST

PICTURE

AUDIO

MONITOR

MODE

SEQ/VTR

QUAD/SPOT

V-HOLD

MIN.

.MAX

ON

OFF

POWER

QUAD

SEQUENCE 1/5

2/6

3/7

4/8

SET UP

Unless recorded by WV-CM146 video tapes cannot be
played back in QUAD or SPOT monitor mode.
Only tapes recorded by WJ-FS20 without VITC signal
can be played back.

Proceed as in steps 1-5 of "Spot picture playback"
above, then follow the steps below;

Press the QUAD/SEQUENCE, SET UP switch.

Set MONITOR MODE to SEQ/VTR.

CAMERA

VTR

INPUT

SELECT

ON

STAND BY

DISPLAY

MODE

COLOUR

BRIGHT

CONTRAST

PICTURE

AUDIO

MONITOR

MODE

SEQ/VTR

QUAD/SPOT

V-HOLD

MIN.

.MAX

ON

OFF

POWER

QUAD

SEQUENCE 1/5

2/6

3/7

4/8

SET UP

• This model cannot clearly reproduce pictures back-

ward.

• In playback mode, the pictures may go unstable a few

times (there is nothing wrong with this model.)

• Depending on the head condition of the VTR, the pic-

ture of another channel may appear on the display. If
this occurs frequently, adjust the tracking or slow-
tracking of the VTR. This will diminish the wrong chan-
nel appearance.

• In playback mode, the skew (playback picture pulled

to horizontal direction) may appear in each playback
(there is nothing wrong with this model.)

• In quad monitor mode, four divided displays are small-

er in size than normal. That makes the recorded char-
acters hard to read. Selecting spot monitor to display
one camera picture makes it easy to read the charac-
ters.

• Playback in linear mode (L12H, L18H, L24H) may pro-

duce noise or the picture of the other channel is repro-
duced on the display in any recording mode of the
time lapse VTR.

• During playback, the horizontal line may appears on

the display sometimes. This does not mean there is
something wrong with this monitor.

■

Set the time lapse VTR in recording mode.

• Move the cursor to TIMING SELECT on SET UP MENU,

and select EXT.

• Time lapse recording is performed with camera switch-

ing pulse supplied by time lapse VTR.

• If no timing pulse comes from the time lapse VTR for a

certain time, the timing is switched to INT automatical-
ly.

• When the WV-CM146 receives the alarm signal,

recording timing changes to real time. This means the
camera picture is recorded in recording mode you
selected on SET UP MENU.

• When the alarm reset pulse is received from the time

lapse VTR, or in case AUTO RESET of SET UP MENU
is set to ON, recording mode returns to time lapse
recording mode.

• It is possible to record in linear slow recording mode

on the VTR. In linear slow recording mode, you can
record not only camera picture but also audio. (You
cannot record audio in time lapse mode.)

• If AUDIO SELECT is set to SEQ on SET UP MENU, you

can record audio from the alarm channel when alarm
signal is received.

When SEQ is selected for AUDIO SELECT, the

recorded picture and audio are not synchronized.

Press the POWER switch on the monitor to turn it on.

Set the DISPLAY MODE switch to ON.

Set the INPUT SELECT switch to VTR.

Set the MONITOR MODE switch to QUAD/SPOT.

Press the desired camera selection switch.