FIC a440 Service Manual
Maintenance & Disassembly
5-14
FIC A440 Series Service Manual
Figure 5-12
CD-ROM Screw Location
5.5.10 Removing the Internal Speaker
The internal speakers are connected on the front left and right side of the base unit assembly.
Both speakers are connected to the audio board using wire cable. Follow the procedure below
and illustration on how to remove the internal speaker:
1. The internal speakers are located on the front left and right side of the base unit. There are
Both speakers are connected to the audio board using wire cable. Follow the procedure below
and illustration on how to remove the internal speaker:
1. The internal speakers are located on the front left and right side of the base unit. There are
no screws attached to the speakers, just unhook the speakers from the speaker
compartment case.
compartment case.
2. The speaker cables are directly connected to the audio board. Pull the wire cable of the
internal speakers and take out them out.
Figure 5-13
Internal Speaker Assembly
5.5.11 Removing the FDD Module
The procedures for removing and replacing the FDD module is as follows:
1. Before removing the FDD module, you need first to disassemble the glidepad, keyboard,
1. Before removing the FDD module, you need first to disassemble the glidepad, keyboard,
heat plate, hard disk, LCD panel, upper casing, CD-ROM module, audio board and I/O
board. The FDD cable is also connected to the I/O board. Detach the FDD cable also.
board. The FDD cable is also connected to the I/O board. Detach the FDD cable also.
2. The FDD module is assembled to the lower left side of the base unit, just on top of the
hard disk drive.
3. Remove the screw securing the lower left side of the FDD metal bracket.
Screws
CDROM