DELL 1100-b110 User Manual

Removing and Installing Parts

61

3 Remove the securing screw from the card bracket.
4 Grasp the card by its top corners, and ease it out of its connector.
5 If you are removing the card permanently, install a filler bracket in the empty card-slot opening.

If you need a filler bracket, contact Dell (see page 94).

 

NOTE: 

Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the 

computer. The brackets also keep dust and dirt out of your computer.

 

NOTICE: 

To connect a network cable, first plug the cable into the network wall jack and then plug it into the 

computer.

6 Close the computer cover, reconnect the computer and devices to electrical outlets, and then turn 

them on.

7 Remove the card’s driver from the operating system.
8 If you removed a sound card:

a

Enter system setup (see page 82), select Audio Controller, and then change the setting to On.

b

Connect external audio devices to the audio connectors on the computer back panel.

9 If you removed an add-in network connector:

a

Enter system setup (see page 82), select Network Controller, and then change the setting to On.

b

Connect the network cable to the integrated connector on the computer back panel.

Front Panel

 

CAUTION: 

Before you begin any of the procedures in this section, follow the safety instructions located in the 

Product Information Guide.

 

CAUTION: 

To guard against electrical shock, always unplug your computer from the electrical outlet before 

opening the cover.