DELL inspiron 4100 User Manual

Removing and Replacing Parts: Dell Inspiron 4100

3.  Close the display and turn the computer over. 

4.  Slide and hold the latch release, and pull the device out of the module bay. 

To prevent damage to devices, place them in a travel case when they are not 

inserted in the computer. Store devices in a dry, safe place, and avoid pressing down on them 

or placing heavy objects on top of them. 

5.  To replace, insert the new device into the bay, and push it until you hear a click. 

Disconnect the computer and any attached devices from electrical outlets, and 

remove any installed batteries. 

To avoid ESD, ground yourself by using a wrist grounding strap or by touching an 

unpainted metal surface on the computer. 

procedure. 

1.  Turn the computer over, and use a flat-blade screwdriver to release the two captive screws 

from the memory module cover. 

2.  Remove the M2.5 x 12-mm screw labeled "circle K." 

3.  Place your finger under the cover at the indentation and lift and slide the cover open. 

file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...20ok/Inspiron/4100/4100_SERVICE_MAN/remove.htm (14 of 52)6/21/2004 1:02:31 AM