JVC dr-m10s User Manual
Filename [DR-M10SE_11Subsidiary.fm]
Masterpage:Left+
104
EN
Page 104
February 12, 2004 5:31 pm
SUBSIDIARY SETTINGS (cont.)
Clock Set
A
Access the Main Menu screen.
Press SET UP.
B
Access the “CLOCK SET” screen.
NOTE:
When you have selected MAGYARORSZÁG, CESKÁ
REPUBLIKA, POLSKA or OTHER EASTERN EUROPE for the
country setting (
REPUBLIKA, POLSKA or OTHER EASTERN EUROPE for the
country setting (
pg. 19), you cannot use Just Clock function.
Skip steps
C
Set the date and time.
A Press rt to select “YEAR”, then press ENTER.
B Press rt to set the year, then press ENTER.
● Repeat the same procedure to set the date and time. When
you set the time, press and hold rt to change the time by 30
minutes.
minutes.
● When you set the date, press and hold rt to change the date
by 15 days.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
Just Clock
The Just Clock function provides accurate time keeping
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set to “ON” or “OFF” at the
Clock Set screen (the default setting is “OFF”). (
through automatic adjustments at regular intervals, by
reading data from a PDC signal.
The Just Clock option can be set to “ON” or “OFF” at the
Clock Set screen (the default setting is “OFF”). (
IMPORTANT: If you turn off Just Clock, the accuracy of your
unit’s built-in clock may be reduced, which could adversely
effect timer recording. We recommend you to keep Just
Clock on. In cases where the clock setting data from a PDC
signal is incorrect, however, you are advised to keep Just
Clock set to “OFF”.
unit’s built-in clock may be reduced, which could adversely
effect timer recording. We recommend you to keep Just
Clock on. In cases where the clock setting data from a PDC
signal is incorrect, however, you are advised to keep Just
Clock set to “OFF”.
DVD
TV
DVD
TIMER
PROG/CHECK
NEXT
PREVIOUS
PAUSE
REC
REC MODE LIVE CHECK
SET UP DISPLAY ON SCREEN
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
PROGRESSIVE
SCAN
SLOW
SLOW
PLAY/SELECT
STOP/
CLEAR
NAVIGATION
TOP MENU
RETURN
ENTER
MENU
STANDBY/ON
ABC
JKL
GHI
MNO
TUV
PQRS
WXYZ
AUX
CANCEL
MEMO/MARK
DEF
CABLE/SAT
PR
SAT#
SHOW VIEW/
VIDEO Plus+
TV/CBL/SAT
TV
TV AV
VIDEO
TV%
rtwe
ENTER
SET UP
DVD
TV
CABLE/SAT
IMPORTANT:
If you performed Auto Set Up (
Download (
pg. 21), without ever having set the clock
previously, the unit’s built-in clock is also set automatically.
Perform the following steps only if —
— Auto Clock Set has not been performed correctly by Auto
Set Up or Preset Download.
OR
— you want to change Just Clock setting. (
Perform the following steps only if —
— Auto Clock Set has not been performed correctly by Auto
Set Up or Preset Download.
OR
— you want to change Just Clock setting. (
“Just Clock” in
the left column)
A Press w e to select
“INITIAL SET UP”, then
press ENTER.
press ENTER.
B Press w e to select
“CLOCK SET”, then press
ENTER.
ENTER.
DR-M10SE_01.book Page 104 Thursday, February 12, 2004 9:08 PM