JVC GR-DF570 User Manual

MasterPage: Left

Makes dark subjects or areas even brighter than 
they would be under good natural lighting. 
Although the recorded image is not grainy, it may 
look as if it is strobing due to the slow shutter 
speed.

Set the Power Switch to “M”.

Set “r” to “NIGHTALIVE”. (

墌 pg. 48) The 

Night-Alive indicator “

” appears.

● The shutter speed is automatically adjusted to 

provide up to 25 times sensitivity.

● “ ” appears beside “

” while the shutter speed 

is being automatically adjusted.

To deactivate Night-Alive
Set “r” to “OFF” so that the Night-Alive 
indicator disappears.

● During Night-Alive, the following functions or 

settings cannot be activated and its indicator 
blinks or goes out:
• Some modes of “Program AE With Special 

• “GAIN UP” in CAMERA Menu (

• “DIS” in MANUAL Menu (

● During Night-Alive, it may be difficult to bring the 

camcorder into focus. To prevent this, use of a 
tripod is recommended.

This feature lets you record still images that look 
like photographs onto a tape.

Set the VIDEO/MEMORY Switch to “VIDEO”. 

(GR-DF570/470 only)

Set the Power Switch to “M”.

Set “SNAP/SLOW” to the desired mode. 

墌 pg. 37, 38) The Snapshot indicator “

” 

appears.

Press SNAPSHOT.

● There is the sound effect of a shutter closing.

● The “O” indication appears and a still image 

will be recorded for approx. 6 seconds, then the 
camcorder re-enters the Record-Standby mode.

● You can perform Snapshot also during recording. 

A still image will be recorded for approx. 
6 seconds, then the normal recording resumes.

● Regardless of the Power Switch position (“A” or 

“M”), Snapshot recording takes place using the 
selected Snapshot mode.

Keeping SNAPSHOT pressed in step 

4 provides 

an effect similar to serial photography. (Interval 
between still images: approx. 1 second)

● The Motor Drive mode is disabled when “REC 

SELECT” is set to “

/

”. (

GR-DF570_470ASIA.book  Page 44  Wednesday, January 19, 2005  9:55 AM