JVC GR-DF570 User Manual

MasterPage: Start_Right

● Before starting Blank Search, if the current 

position is at a blank portion, the camcorder 
searches in the reverse direction. If the current 
position is at a recorded portion, the camcorder 
searches in the forward direction.

● If the beginning or end of the tape is reached 

during Blank Search, the camcorder stops 
automatically.

● A blank portion which is shorter than 5 seconds of 

tape may not be detected.

● The detected blank portion may be located 

between recorded scenes. Before you start 
recording, make sure there is no recorded scene 
after the blank portion. 

 

A

Black to S-VIDEO IN (Connect when your TV/
VCR has S-VIDEO IN and A/V input 
connectors. In this case, it is not necessary to 
connect the yellow video cable.)

B

Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)

C

Red to AUDIO R IN**

D

White to AUDIO L IN**

*

If your VCR has a SCART connector, use the 
provided cable adapter.

** Not required for watching still images only.

● Set the video out select switch of the cable 

adapter as required:
Y/C: When connecting to a TV or VCR which 
accepts Y/C signals and uses an S-Video cable.
CVBS: When connecting to a TV or VCR which 
does not accept Y/C signals and uses an audio/
video cable.

● The S-Video cable is optional. Be sure to use 

the YTU94146A S-Video cable. Consult the 
JVC Service Center described on the sheet 
included in the package for details on its 
availability. Make sure to connect the end with 
a core filter to the camcorder. The core filter 
reduces interference.

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as 

shown in the illustration.

If using a VCR, go to step 

3.

If not, go to step 

4.

Connect the VCR output to the TV input, 

referring to your VCR’s instruction manual.

Turn on the camcorder, the VCR and the TV.

Set the VCR to its AUX input mode, and set 

the TV to its VIDEO mode.

Start playback on the camcorder. (

墌 pg. 22)

● Date/time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. 
(

墌 pg. 37, 42)

Or, press DISPLAY on the remote control to turn 
on/off the date indication.

● Time code

Set “TIME CODE” to “ON” or “OFF”. 
(

墌 pg. 37, 42)

● Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. 
(

墌 pg. 37, 42)

2

4

1

3

GR-DF570_470PAL_05Video.fm  Page 23  Wednesday, January 19, 2005  5:00 PM