JVC GR-DF570 User Manual

MasterPage: Left

Make sure all units are turned off.

Connect this camcorder to a video unit 

equipped with a DV input connector using a DV 
cable as shown in the illustration.

Start playback on the camcorder. (

At the point you want to start dubbing, start 

recording on the video unit. (Refer to the video 
unit’s instruction manual.)

To stop dubbing, stop recording on the video 

unit, then stop playback on this camcorder.

● It is recommended to use the AC Adapter as 

● If a blank portion or disturbed image is played 

back on the player during dubbing, the dubbing 
may stop so that an unusual image is not dubbed.

● Even though the DV cable is connected correctly, 

sometimes the image may not appear in step 

this occurs, turn off the power and make 
connections again.

● If “Playback Zoom” (墌 pg. 27) or “Playback 

墌 pg. 27) is attempted or 

SNAPSHOT is pressed during playback, only the 
original playback image recorded on the tape is 
output from the DV IN/OUT connector.

● When using a DV cable, be sure to use the 

Make sure all units are turned off.

Connect this camcorder to a video unit 

equipped with a DV output connector using a DV 
cable as shown in the illustration.

Set the camcorder’s Power Switch to “PLAY”.

Set “REC MODE” to “SP” or “LP”. (

Press the Recording Start/Stop Button to 

engage the Record-Pause mode.

● The “

” indication appears on the screen.

Start playback on the player.

At the point you want to start dubbing, press 

the Recording Start/Stop Button to start 
dubbing. The 

 indication rotates.

Press the Recording Start/Stop Button again 

to stop dubbing. The 

 indication stops 

rotating.

Press 8 to return to the normal playback 

mode.

● If no image is displayed on the LCD monitor, set 

“S/AV INPUT” to “OFF”. (

墌 pg. 37, 42)

● Digital Dubbing is performed in the sound mode 

recorded on the original tape, regardless of the 
current “SOUND MODE” setting. (

GR-DF570_470PAL_07Advanced.fm  Page 54  Tuesday, January 18, 2005  1:21 AM