Konig CMP-WNROUT20 User Manual

2

Front Panel and LED Indicators 

LED indicator description on front panel: (from L to R)

When turns green, always ON indicates the power is connected. 

When turns green, flashing indicates the system runs well.

• 

When flashing, it indicates the device is communicating with client in WPS mode.

• 

Wireless signal LED indicator. When turns green, flashing indicates the wireless function is enabled.

Wired local network LED indicator. Always ON indicates it is connected with Ethernet device; flashing indicates the 
device is transmitting and/or receiving data.

Wide area network indicator. Always ON indicates the Router’s W.

Rear Panel

Rear Panel: (From L to R)

The jack is for power adapter connection. Please use the included 9V DC power adapter. 

A 100Mbps Ethernet port, can be connected with MODEM, switch, router and other Ethernet device for Internet 
connecting to DSL MODEM, cable MODEM and ISP.

4 10/100Mbps Ethernet ports can be connected with Ethernet switch, Ethernet router and NIC card.

The system reset button. Press this button for 7 seconds, the settings configured in this device will be deleted and it 
will restore the settings to default.

Press for 1 second, the WPS feature will be enabled and WPS indicator will be flashing.

Step 1: Please use the included power adapter to power on the Router. IMPORTANT: Use of a different power adapter 

could cause damage and void the warranty for this product. 

Step 2: Please connect the LAN port of the Router to the network adapter of your computer via cable. 

Step 3: Please connect your broadband line provided by your ISP to the WAN port. 

Step 4: Insert the included CD-ROM into the CD-ROM drive, double click the “Setup” icon and follow the instructions 

to complete the installation. Or you can enter the router’s web page to configure. (More details please refer to 
Chapter 3.)