Konig CMP-WNROUT20 User Manual

3

1.  On your computer desktop right click “My Network Places” and select “Properties”. 

2.  Right click “Local Area Network Connection” and select “Properties”.

3.  Select “Internet Protocol (TCP/IP)” and click “Properties”.

4.  - Select “Obtain an IP address automatically” and “Obtain DNS server address automatically”. Click “OK” to save the 

configuration.

- Or select “Use the following IP address” and enter the IP address, subnet mask, default gateway as follows: IP 
Address: 192.168.0.XXX: (XXX is a number from 2~254) Subnet Mask: 255.255.255.0

Gateway: 192.168.0.1. Certainly you need to input the DNS server address provided by your ISP. Otherwise, you can 
use the router’s default gateway as the DNS proxy server. Click “OK” to save the configuration. 

1.  To access the router’s web-based interface, launch a web browser such as Internet Explorer or Firefox and enter the 

router’s default IP address, http://192.168.0.1. Press “Enter”. 

2.  Input the “admin” in both User Name and Password. Click “OK”.

Here is the “Welcome to Setup Wizard” for configuring your Router quickly. Click “Next”.

In this screen, select one mode of your Internet connection you use. If you are not clear, press the “Detect” button or 
contact your Internet Service Provider, and click “Next”.

Enter the Account and Password provided by your ISP, and click “Next”.

If your connection mode is Dynamic IP, it means your IP address keeps changing every time you connect. You do not 
need to enter the information like other modes. Click “Next” and “Save” to finish the setting.

In this screen, fill the network address information from your ISP in the IP Address, Subnet Mask, Gateway and Primary 
DNS server fields and click “Next”. 

Consult your ISP for the required information.

LAN Settings are for the basic TCP/IP parameters of LAN ports.

 

IP Address: The Router’s LAN IP addresses (not your PC’s IP address). 192.168.0.1 is the default value.

 

Subnet Mask: Shows the router’s subnet mask for measurement of the network size. 255.255.255.0 is the default 
value. 

Once you modify the IP address, you need to remember it for the web-based utility login next time.

After you have selected the ISP connection type in “Setup Wizard” and you want to modify the related settings, here you 
can modify and configure the settings in details.

If connection mode static IP is selected, you can modify the following address information.

 

IP Address: Here enter the WAN IP address provided by your ISP.

 

Subnet Mask: Enter the WAN subnet mask here.

 

Gateway: Enter the WAN gateway here.

 

Primary DNS Server: Enter the primary DNS server provided by your ISP.

 

Secondary DNS Server: Enter the secondary DNS.