Toshiba lf546 User Manual
−
64 −
6 F 8 A 0 9 3 4
Switch operation
Display example
Description
STEP4(=END)
CS VAL
2.25000
SET OK?
Pushing shows a message to confirm
whether the setting is OK or not.
If OK, push . If you need to redo the
setting, push .
Pushing cancels the setting operation
and exits the setting screen.
whether the setting is OK or not.
If OK, push . If you need to redo the
setting, push .
Pushing cancels the setting operation
and exits the setting screen.
Note: The custom coefficient setting precision is 5 digits. Therefore, the input value changes
as follows depending on the setting value:
(Example) Input value, "85713038" → After the setting is confirmed, "85713040"
8.2.8 Custom Unit Setting
You can set the custom unit used when CUSTOM is selected for display setting.
For custom unit setting, you can set any combination of characters within 7 characters.
The following is an example to change the custom unit from AAA/BBB to XXX/ZZZ.
For custom unit setting, you can set any combination of characters within 7 characters.
The following is an example to change the custom unit from AAA/BBB to XXX/ZZZ.
Switch operation
Display example
Description
B:DISPLAY
1 DSPL1
2 DSPL2
3 CS VAL
4 CS UNIT
5 EXIT
Select "CS UNIT" from the setting item
selection menu.
selection menu.
STEP1
CS UNIT
AAA/BBB
The currently set custom unit (AAA/BBB in
this example) appears.
Then push .
* Pushing returns you to the setting
this example) appears.
Then push .
* Pushing returns you to the setting
menu.
STEP2
CS UNIT
A
AA/BBB
The switches at the bottom change.
( are shown.)
At the same time, the cursor appears.
( are shown.)
At the same time, the cursor appears.
STEP3
CS UNIT
X
AA/BBB
Push or to change the
character.
When the desired character is obtained,
push . The cursor moves to the next
character.
character.
When the desired character is obtained,
push . The cursor moves to the next
character.
N O
O K
ESC
O K
N O
ESC
ESC
ESC
ESC