packardbell easynote e Service Manual

To remove the ODD, first remove the battery (see

following steps:

1.  Remove the screws retaining the optical drive as shown in Fig. 15

2.  Carefully open up small gap between top cover and bottom cover. Hock on the ODD bezel

and carefully remove ODD

Note 1: You might loosen only all screws marked as B instead of remove it.
Note 2: When assemble the ODD, you might put a tine cardboard on the ODD before insert it to base
unit. It will easy the ODD installation
Note 3: You consider removing Bottom Cover before remove ODD.