Siemens MC35 User Manual
AT Command Set
MC35_ATC_01_V05.00
Page 54 of 256
15.07.2002
3.9 AT+FDFFC Data Compression Format Conversion
Test command
AT+FDFFC=?
This parameter determines the ME response to a mismatch between the data
format negotiated for the facsimile session, reported by the +FDCS:DF sub-
parameter, and the Phase C data desired by the controlling application, indi-
cated by the optional +FDT:DF subparameter, or the +FDIS=DF subparameter
for the +FDR operation.
format negotiated for the facsimile session, reported by the +FDCS:DF sub-
parameter, and the Phase C data desired by the controlling application, indi-
cated by the optional +FDT:DF subparameter, or the +FDIS=DF subparameter
for the +FDR operation.
Response
(list of supported
<df>s) OK
Parameter
See write command
Read command
AT+FDFFC?
Response
<df> OK
Parameter
See write command
Write command
AT+FDFFC =<df>
Response
OK
Parameter
<df>
0
Mismatch checking is always disabled. The controlling ap-
plication has to check the +FDCS: DF subparameter and
transfer matching data.
plication has to check the +FDCS: DF subparameter and
transfer matching data.
Reference
EIA PN-2388
Note
Used for Fax Class 2 only