Siemens MC35 User Manual
AT Command Set
MC35_ATC_01_V05.00
Page 61 of 256
15.07.2002
3.25 AT+FTM Transmit Data
Test command
AT+FTM=?
Response
(List of supported modulation modes)
OK
Parameter
See write command
Write command
AT+FTM=<mod>
This command causes the TA to transmit data using the modulation mode de-
fined below. An ERROR response code results if this command is issued while
the modem is on-hook.
fined below. An ERROR response code results if this command is issued while
the modem is on-hook.
Response
CONNECT
If error is related to ME functionality:
ERROR
If error is related to ME functionality:
ERROR
Parameter
<mod>
modulation mode
96
V.29
9600
bps
72
V.29
7200
bps
48
V.27ter
4800
bps
24
V.27ter
2400
bps
Reference
TIA/EIA-578
Note
Used for Fax class 1 only
3.26 AT+FTS Stop Transmission and Wait
Write command
AT+FTS=<time>
This command causes the TA to terminate a transmission and wait for <time> 10
millisecond intervals before responding with the OK result code to the DTE.
millisecond intervals before responding with the OK result code to the DTE.
Response
An ERROR response code results if this command is issued while the modem is
on-hook.
on-hook.
Parameter
<time> 0 – 85 no. of 10 millisecond intervals
Reference
TIA/EIA-578
Note
Used for Fax class 1 only