Yamaha AV Receiver User Manual

You can display the format, sampling frequency, channel, 
bit rate and flag data of the current input signal.

Set the component selector switch to AMP 
and then press SET MENU on the remote 
control.
The top “SET MENU” display appears in the OSD.

Press d repeatedly to select “SIGNAL INFO” 
and then press ENTER.
The following information about the input source 
appears in the OSD.

  FORMAT

Signal format display. When this unit cannot detect a 
digital signal, it automatically switches to analog 
input.
Display status: Analog, Digital, Dolby D, DTS, PCM, 

---

“---” appears when this unit cannot detect any signals.

  SAMPLING

The number of samples per second taken from a 
continuous signal to make a discrete signal.
Display status: 32kHz, 44.1kHz, 48kHz, 64kHz, 

88.2kHz, 96kHz, ---

“---” appears when this unit cannot detect the sampling 
frequency.

  CHANNEL

The number of source channels in the input signal 
(front/surround/LFE). For example, a multi-channel 
soundtrack with 3 front channels, 2 surround 
channels and LFE, is displayed as “3/2/0.1”.

“---” appears when there is no source channel available.

  BITRATE

The number of bits passing a given point per second.

“---” appears when this unit cannot detect the bit rate.

  FLAG

Flag data encoded in DTS, Dolby Digital, or PCM 
signals that cue this unit to automatically switch 
decoders.

SET MENU

.;BASICSETUP

;MANUALSETUP

.;SIGNAL INFO

[ ]/[]:Up/Down
[ENTER]:Enter

p

p

;SIGNAL INFO

FORMAT

   

PCM    

SAMPLING   48kHz
CHANNEL  2/0/---
BITRATE  

---

FLAG

NONE