Yamaha AV Receiver User Manual

Page of 116
40
USING VIDEO FEATURES
You can display the operating information of this unit on a 
video monitor. If you display the “SET MENU” and sound 
field program parameter settings on a video monitor, it is 
much easier to see the available options and parameters 
than it is to read the information in the front panel display.
1
Turn on the video monitor connected to this 
unit.
2
Set the component selector switch to AMP 
and then press DISPLAY on the remote 
control repeatedly to toggle between the 
OSD modes.
The OSD mode changes in the following order.
Full display
Fully shows the sound field program parameter 
settings as well as the contents of the front panel 
display.
Short display
Briefly shows the contents of the front panel display 
at the bottom of the screen each time you operate this 
unit.
Display off
No information is displayed except for the “SET 
MENU” screen.
y
You can display a gray background in the OSD when there 
is not video signal being input by setting “GRAY BACK” in 
“OPTION MENU” to “AUTO” (see page 86).
• The OSD signal is not output at the DVR OUT jacks and 
will not be recorded.
• You must set “VIDEO CONV.” in “OPTION MENU” to 
• To display the OSD with the component video signals 
output at the COMPONENT VIDEO MONITOR OUT 
jacks, set the OSD mode to the full display mode.
• When “GRAY BACK” in “OPTION MENU” is set to 
“OFF” (see page 86), the OSD may not be displayed 
correctly depending on the conditions of the picture.
You can combine a video image from a video source with 
sound from an audio source. For example, you can enjoy 
listening to classical music while viewing beautiful 
scenery from the video source on the video monitor.
Press the input selector buttons on the remote 
control to select a video source and then an 
audio source.
If you want to enjoy an audio source input at the MULTI CH 
INPUT jacks together with a video source, first select the video 
source and then press MULTI CH INPUT on the front panel (or 
MULTI CH IN on the remote control) to select the component 
connected to the MULTI CH INPUT jacks as the input source 
(see page 37).
Selecting the OSD mode
DISPLAY
AMP
SOURCE
TV
Full display
Short display
Display off
P02
MUSIC
.
Pop/Rock
DSP LEVEL
;;;;0dB
P.INIT.DLY
;;21ms
P.ROOM SIZE
;;1.0
S.INIT.DLY
;;25ms
S.ROOM SIZE
;;1.0
P02
MUSIC
Pop/Rock
Full display
Short display
Notes
Playing video sources in the 
background
Note
CD
MULTI CH IN
SLEEP
CD-R
DVD
DTV
MD
CBL
TUNER
V-AUX
DVR
XM
CD
CD-R
DVD
DTV
MD
CBL
TUNER
V-AUX
DVR
Audio sources
Video sources