Yamaha cd-r1000 User Manual
40
Chapter 5—Recording
CDR1000—Owner’s Manual
One-track Sync Recording
This section explains how to use One-track Sync Recording.
The following illustration shows the procedure for One-track Sync Recording.
1
Prepare for recording, as explained on page 25, setting the input source to
COAX, but instead of proceeding to the Recording section, proceed as fol-
lows.
COAX, but instead of proceeding to the Recording section, proceed as fol-
lows.
2
From stop, press the [SYNC REC] button.
Record Standby mode is engaged, “SYNC-REC 1” appears on the display, the PAUSE
indicator lights up, and the REC indicators flash. If the loaded disc is a blank disc, track
1 is selected for recording. If it’s a partially recorded disc, the next available track is
selected.
indicator lights up, and the REC indicators flash. If the loaded disc is a blank disc, track
1 is selected for recording. If it’s a partially recorded disc, the next available track is
selected.
The LOCK indicator should appear, indicating that the CDR1000 is locked to the
incoming digital signal. Sync Recording is not possible if the LOCK indicator does not
light up or is flashing. See “Selecting the Input Source” on page 25 for more informa-
tion.
incoming digital signal. Sync Recording is not possible if the LOCK indicator does not
light up or is flashing. See “Selecting the Input Source” on page 25 for more informa-
tion.
In Record Standby mode, the selected input source can be monitored via the ANALOG
OUT, AES/EBU OUT, COAXIAL OUT, or PHONES, and metered on the CDR1000
level meters.
OUT, AES/EBU OUT, COAXIAL OUT, or PHONES, and metered on the CDR1000
level meters.
You can cancel One-track Sync Recording at anytime by pressing the [STOP] button.
A two-second mute can be inserted at the beginning of the track by using the Rec Mute
function. See “Inserting a Two-second Mute” on page 35 for more information.
function. See “Inserting a Two-second Mute” on page 35 for more information.
Discs can be finalized automatically when Sync Recording is stopped, using the Auto
Finalize function. Press the [SYNC REC] button while Record Standby mode is
engaged to turn on the Auto Finalize function. “AUTOFINALIZE” appears on the dis-
play. Press again to cancel Auto Finalize. See page 44 for more information on finalizing
discs.
Finalize function. Press the [SYNC REC] button while Record Standby mode is
engaged to turn on the Auto Finalize function. “AUTOFINALIZE” appears on the dis-
play. Press again to cancel Auto Finalize. See page 44 for more information on finalizing
discs.
3
Prepare the source CD, MD, or DAT player so that it’s ready to play the track
that you want to record.
that you want to record.
The CDR1000 will start recording when it receives a Track Number or Start ID. CD or
MD players must be stopped or paused at the top of the track to be recorded, as Sync
Recording cannot be started while the source device is playing.
MD players must be stopped or paused at the top of the track to be recorded, as Sync
Recording cannot be started while the source device is playing.
Tn=1
Recording starts
(SYNC-REC 1)
Track Number
or Start ID
Recording stops
Track Number,
Start ID, or Skip ID
SYNC
REC