Yamaha cd-r1000 User Manual

Recording

The CDR1000 can record onto CD-R and CD-RW discs.

Load the disc to be used for recording.

Select the input source.

See “Selecting the Input Source” below for more information.

If recording via the AES/EBU IN or COAXIAL IN, set the sampling rate con-
verter as necessary.

Set the Copy Bit as required.

Set the UV22 function as required.

Set the Delay function as required.

The following input sources can be selected for recording: ANALOG IN, AES/EBU IN, 
or COAXIAL IN. The selected source is indicated on the display.

Use the [INPUT SELECT] button to select an input source.

When a digital input source is selected, the LOCK indicator lights up, indicating that 
the CDR1000 is locked to the incoming signal. If the CDR1000 cannot lock to the 
selected digital input source, the LOCK indicator flashes. If this unlocked condition 
continues for more than five seconds while recording, recording stops. If this happens, 
make sure that the source device is turned on and connected to the CDR1000 correctly, 
or select another input source. Recording via the AES/EBU IN or COAXIAL IN is not 
possible while the LOCK indicator is flashing.

ANALOG IN (analog)

AES/EBU IN (AES/EBU digital)

COAXIAL IN (S/PDIF digital)