Yamaha cd-r1000 User Manual

Chapter 6—Other Functions

The AES/EBU OUT and COAXIAL OUT can be set so that they output playback and 
monitor signals, or signals received at the AES/EBU IN and COAXIAL IN respectively. 
This is useful when two CDR1000s are used to record the same digital source.

The Utility Digital Out parameter is used to set the digital outputs.

Use the [UTILITY] button to select “D-OUT.”

The UTILITY indicator lights up and the Digital Out setting appears on the display.

Use the [PREV] and [NEXT] buttons to select either “NORMAL” or “THRU.”

Press and hold the [UTILITY] button, or press another button to cancel Utility.

In this example, several CDR1000s are used 
for disc duplication. The source machine is a 
standard CD player with a coaxial output. 
Alternatively, the source machine could be 
an MD or DAT player. The Utility Digital 
Out parameter on each CDR1000 is set to 
THRU, so that digital audio received at the 
COAXIAL IN connector is fed directly 
through to the COAXIAL OUT and onto the 
next CDR1000.

Track and Index Numbers from the CD 
player are transmitted together with the dig-
ital audio via the coaxial connections, for 
synchronized recording. See page 39 for 
more information.

Use only phono cables with a 75

Ω

 imped-

ance for coaxial connections. Using ordi-
nary audio cables can cause digital audio 
transmission errors.

The AES/EBU OUT and COAXIAL OUT output playback and monitor 
signals.

The AES/EBU OUT and COAXIAL OUT output the signals received at 
the AES/EBU IN and COAXIAL IN respectively.

COAXIAL OUT

COAXIAL IN

COAXIAL OUT

COAXIAL IN

CD player (source machine)

CDR1000

D-OUT: THRU

CDR1000