Yamaha cd-r1000 User Manual
50
Chapter 6—Other Functions
CDR1000—Owner’s Manual
Using a Footswitch
An optional footswitch, such as the Yamaha FC5, can be connected to the FOOT SW
jack and used to stop and start playback and recording. Footswitch operation depends
on the current mode, as shown in the following table.
jack and used to stop and start playback and recording. Footswitch operation depends
on the current mode, as shown in the following table.
Disabling the Remote Controller
The remote controller can be disabled using the Utility Remote parameter, thereby pre-
venting accidental operation.
venting accidental operation.
1
Use the [UTILITY] button to select “REMOTE.”
The UTILITY indicator lights up and the Remote setting appears on the display.
2
Use the [PREV] and [NEXT] buttons to select either “ON” or “OFF.”
3
Press and hold the [UTILITY] button, or press another button to cancel Utility.
Current Mode
Footswitch Operation
Stop
Playback starts from the selected track number.
1
1. Tracks can be selected using the [PREV] and [NEXT] buttons before starting playback.
Playback
Playback stops.
Record Standby
Recording starts.
2
2. Footswitch operation is ignored when using Sync Recording.
Recording
Setting
Description
ON
The remote controller operates as normal.
OFF
Commands transmitted by the remote controller are ignored.