Yamaha digital mixing studio 01x User Manual

01X   Owner’s Manual

In the section above you learned how to route digital audio 

into the 01X.

In this section, we’ll see how to send it back out again.  

One common routing would be to send the entire stereo 

mix to the digital output for recording.  Another would be 

to use the digital output as an aux stereo send for external 

effects.  

■ Operation

q Connect the digital source to the DIGITAL STEREO 

OUT jack on the rear panel.

If you are using the digital output as an aux send, make 

sure your external effect processor has an appropriate 

digital input.  If you are recording the stereo mix, use 

the digital input on your recorder (DAT deck, etc.).  As 

above, the 01X connectors are S/PDIF; make sure the 

device you are connecting has the same.  

w Call up the Utility mode by pressing the [UTILITY] 

button.

e Press knob 2 to call up the Patch parameters.

r Select page 6 with the DISPLAY [ / ] (Up/Down) 

buttons.

Page 6 contains Output Patch settings for the DIGITAL 

STEREO OUT and STEREO/AUX OUT jacks.

t Use knob 1 to change the assignment to the DIGITAL 

STEREO OUT jack.

If you want to use the digital output as an aux send, set 

this to “AUX1/2.” 

Using the Aux 1/2 sends for external effects lets you 

retain the Aux 3/4 sends for the internal effects.  You’ll 

also need to make other settings, such as routing the 

external effect signal back into the 01X (page 88).  For 

more details on using external effects, see page 60. 

If you want to send the stereo mix to the digital output 

for recording, set this to “RECBUS.”

Make sure to save your important Patch setups to the 

Output Patch Library so that you can call them up in 

the future.  (See page 91.)

UTILITY

OUTPUT PATCH (DIGI. ST/AUX OUT PORT)

6/8

[ST-BUS]≥D.OUT

[ST-BUS]≥ST/AUX OUT

Page number (current 
page is 6 of 8 total)

DIGITAL STEREO 
OUT

STEREO/AUX 
OUT

UTILITY

OUTPUT PATCH (DIGI. ST/AUX OUT PORT)

6/8

[AUX1/2]≥D.OUT

[ST-BUS]≥ST/AUX OUT

UTILITY

OUTPUT PATCH (DIGI. ST/AUX OUT PORT)

6/8

[RECBUS]≥D.OUT

[ST-BUS]≥ST/AUX OUT