Yamaha elb01e1 User Manual

                                                     ELB-01 Owner’s Manual

27

Voices

2

Pressing the same Voice button on the panel again after selecting the Voice calls up the 
Voice Condition display. The Volume is displayed in the top left of the Voice 
Condition display Page 1. You can change the Volume by using the DATA 
CONTROL dial when the arrow indicator (“¿” or “÷”) next to the Volume value is 
flashing. If the arrow indicator is not flashing, press one of the [A] – [D] buttons 
corresponding to the item or parameter you want to change to make the indicator 
flash, then use the DATA CONTROL dial to select the desired control setting. 
The range of the Fine volume control is 0 – 24.

Depending on the volume 
value (set in the display), 
two adjacent Volume button 
lamps may be lit at the same 
time, indicating an 
intermediate position. 

VOL.¿24  REV.÷20 ¨1⁄
TOUCH¿ 8 FEET÷PRESET

Pressing a Voice button once calls up the Voice Menu display for the selected 
button. Pressing it a second time calls up the Voice Condition display. Successive 
presses alternate between the two displays.

From the Voice Condition display, you can control Voice-related parameters such as 
Pan, Effect, Volume, and so on. For more information on the Voice Condition 
display, see page 41.

<STRINGS/VIOLIN>  ¨1
¿01:Strings 1       

VOL.¿24  REV.÷20 ¨1⁄
TOUCH¿ 8 FEET÷PRESET

Voice Menu Display

Voice Condition Display