Yamaha emx62m User Manual

 

Front & Rear Panels

 

■

 

The DIGITAL EFFECT section is used to turn the 
built-in digital effects processor on and off and 
select effects programs.

 

F

 

These switches are used to select the effects pro-
grams: VOCAL REVERB, LARGE HALL, 
SMALL HALL.

 

G

 

The DIGITAL EFFECT ON switch is used to turn 
the built-in digital effects processor on and off. 
The indicator lights up when the processor is on. 
When the processor is on, its output is fed to the 
MAIN and MONITOR buses via the MAIN 
EFFECT RTN 

 

9 

 

and MONITOR EFFECT RTN 

 

E 

 

controls respectively.

The effects processor can also be turned on and 
off remotely by connecting an optional foot-
switch to the FOOT SW jack.

 

■

 

The MAIN section is used to set the MAIN MAS-
TER level, 7-band graphic equalizer, AUX IN and 
2TR IN levels, and MAIN EFFECT RTN level. It 
also contains the LIMITER indicator and main 
output level meter.

 

H

Graphic equalizer
The 7-band graphic equalizer is used to boost or 
cut certain frequencies of the MAIN output sig-
nal by up to ±12 dB. It affects the MAIN OUT-
PUT signal, the speaker outputs, and the 
PHONES.

I

EFFECT RTN control
The MAIN EFFECT RTN control determines the 
level of the signal from the built-in digital effects 
processor that is fed to the MAIN bus and subse-
quently the MAIN outputs.

J

AUX IN control
The AUX IN control determines the level of the 
AUX IN signal that is fed to the MAIN bus and 
subsequently the MAIN outputs.

K

2TR IN control
The 2TR IN control determines the level of the 
2TR IN signal that is fed to the MAIN bus and 
subsequently the MAIN output.

L

MASTER control
The MAIN MASTER control determines the out-
put level of the MAIN OUT, speaker outputs, and 
PHONES.

6

7

8

9

0

A

B

C

D