Yamaha emx62m User Manual

 

EMX62M Quick Guide

 

1 Turn on the power to all external devices con-

nected to the EMX62M.

2 Make sure that the MASTER controls in the 

MONITOR section and the MAIN section are set 
to “0,” then press the POWER switch on the 
EMX62M to turn on the power.

 

• Be sure to follow the power up sequence specified 

above to prevent the speakers from being damaged.

• The speakers do not have a power switch.

 

Set the MASTER control in the MAIN section to 
“

  

√

√

√

√

 

,” then while playing an instrument con-

nected to a channel to be checked (or while 
speaking to a connected microphone), adjust the 
LEVEL control of the corresponding channel so 
that the 0 LED of the peak level indicator in the 
MAIN section will light up momentarily.

 

• Do not press the PAD switch if sound is input from 

the microphone. Otherwise, press the PAD switch 
on.

• Note that if the LIMITER indicator stays lit for a 

long time, the built-in amplifier and speakers may 
be damaged.

• To correct the low range, turn on the YAMAHA 

SPEAKER PROCESSING switch in the upper right 
corner of the panel.

 

1 Turn on the ON switch in the DIGITAL EFFECT 

section. The ON switch indicator lights up.

2 Select one of three effect types, then press the 

switch.

3 Adjust the amount of effect applied by using the 

EFFECT control of the target channel and the 
EFFECT RTN control in the MAIN section.

 

1 Press the POWER switch of the EMX62M to turn 

off the power to the unit.

2 Turn off the power to all connected devices.

 

• Be sure to follow the power off sequence specified 

above to prevent the speakers from being damaged.

• Set the MASTER controls in the MAIN section and 

the MONITOR section to “0” for use next time (so 
that a loud noise will not sound the next time you 
turn on the power to the unit).

EMX62M

EMX62M

EMX62M