Yamaha emx62m User Manual

EMX62M Quick Guide

EMX62M—Owner’s Manual

EMX62M Quick Guide

The following steps (1-5) explain the basic con-
nection and operation of the EMX62M.
Also, please read “Front and Rear Panel” and
“Basic Operation” following this Quick Guide
section to learn more about using the EMX62M.

Connection

Connecting speakers

Using speaker cables, connect each speaker to the
SPEAKERS 1 and 2 jack on the rear panel of the
EMX62M.

• The EMX62M is a monaural mixer. The same signal

will be output from all SPEAKERS jacks on the rear
panel. You do not need to differentiate right from
left speakers.

• You may connect to either of the two jacks on the

speakers.

• Be sure to use a cable designed for speaker connec-

tion.

Never connect the speakers in the manner shown
below. Otherwise, the EMX62M’s built-in power
amplifier will be damaged.

Connecting a microphone

Make sure that the power is turned off to the
EMX62M.
Connect a microphone to the Low-Z jack of
channel 1-4.

Using a condenser microphone

Turn on the PHANTOM switch (located in the
upper right corner on the panel).

• Do not connect or disconnect a condenser micro-

phone while the power to the unit is on and the
PHANTOM switch has been turned on.

Connecting a CD player, MD player, and/or cassette
deck

Connect a CD player or MD player to the 2TR IN
jacks. Refer to the operation manual of the corre-
sponding device for more information on the
input and output of the device.

STEP 1

EMX62M

Microphone

EMX62M

PHANTOM switch

EMX62M

Recorder

(Cassette, DAT, MD)

CD player