Yamaha RX-V1900BL User Manual

• If the “ERROR” or “WARNING” screens appears, check the cause of the problem, then run “

AUTO SETUP

” again.

• If warning message “W-2” or “W-3” appears, the adjustments are made, however the adjustment may not be optimal.
• Depending on the speakers, warning message “W-1” may appears even if the speaker connections are correct.
• If error message “E-10” occurs repeatedly, contact a qualified Yamaha service center.

W-1:OUT OF PHASE

Speaker polarity is not correct. This 
message may appear depending on the 
speakers even when the speakers are 
connected correctly.

Check the speaker connections for proper 
polarity (+ or –).

W-2:OVER 24m (80ft)

The distance between the speaker and the 
listening position is over 24 m (80 ft).

Bring the speaker closer to the listening 
position.

—

W-3:LEVEL ERROR

The difference of volume level among 
speakers is excessive.

Readjust the speaker installation so that all 
speakers are set in locations with similar 
conditions.

—

Check the speaker connections.

Use speakers of similar quality.

—

Adjust the output volume of the subwoofer.