Yamaha RX-V1900BL User Manual

y

You can configure the display settings with "VIDEO 
MENU" (page 80) and “DISPLAY SET” (page 83).

Rotate the C

INPUT selector (or press one 

of the input selector buttons (3))

The name of the selected input source appears for a 
few seconds.

Start playback on the selected source 
component or select a broadcast station.
• Refer to the instruction manuals for the source 

component.

• FM/AM radio tuning (page 47)
• XM Satellite Radio tuning (page 52)
• SIRIUS Satellite Radio tuning (page 57)
• iPod playback (page 63)
• Bluetooth component playback (page 65)

Rotate Q

VOLUME (or press IVOLUME +/–) 

y

To adjust the level of each speaker, see page 46.

Rotate the N

PROGRAM selector (or press 

one of the sound field program selector 
buttons (P) repeatedly) to select the desired 
sound field program.
For details about sound field program, see page 39.

y

To switch the information (current input source, current 
sound field program, etc) displayed in the front panel 
display, press 

LINFO (or set the operation mode selector 

to EAMP and press BINFO) repeatedly.

Caution
Extreme caution should be exercised when you play 
back CDs encoded in DTS. If you play back a CD 
encoded in DTS on a DTS-incompatible CD player, 
you will only hear some unwanted noise that may 
damage your speakers. Check whether your CD player 
supports CDs encoded in DTS. Also, check the sound 
output level of your CD player before you play back a 
CD encoded in DTS.

y

To play DTS-encoded CDs when using a digital audio 
connection, set “DECODER MODE” in “INPUT MENU” 
to “DTS” before the playback (page 82).

Before performing the following operations, set the operation 
mode selector on the remote control to EAMP.

D V D

M o v i e

S c i - F i