Yamaha RX-V1900BL User Manual

Short message display
SHORT MESSAGE
Use this feature to activate or deactivate the short message 
display function.

The short message display does not appear in the following 
cases:
– when the component video signals with 480p/576p, 720p, 

1080i or 1080p resolutions are input

– when HDMI video signals are input

ON SCREEN

Use this feature to set the amount of time to display the 
HD Radio (U.S.A. model only), XM Satellite Radio, or 
SIRIUS Satellite Radio information or iPod menu in the 
OSD after you perform a certain operation.

FL SCROLL

Use this feature to set the mode to display the HD Radio 
(U.S.A model only), XM Satellite Radio information, 
SIRIUS Satellite Radio information, or iPod menu (such 
as song title or channel name) in the front panel display.

■ Memory guard

B)MEMORY GUARD

Use this feature to prevent accidental changes to sound 
field program parameter and other system settings.

You can change the following parameters even if “MEMORY 
GUARD” is set to “ON”:

– “DECODER MODE” in “INPUT MENU” (page 82)
– “MEMORY GUARD”
– “SUR.” of the sound field program parameter (page 72)
– "TONE BYPASS" in "SOUND MENU" (page 80)
– Loading the system settings (page 87)

■ Initial configuration

C)INIT. CONFIG

Use this feature to select the settings of the audio input 
jack select, active decoders and extended surround when 
you turn on this unit.

AUDIO SELECT

Use this feature to designate the default audio input jack 
select setting (page 36) for the input sources connected to 
the DIGITAL INPUT jacks when you turn on the power of 
this unit.

DECODER MODE

Use this feature to designate the default decoder mode 
(page 82) for the input sources connected to the DIGITAL 
INPUT jacks when you turn on the power of this unit.

Activates the short message display function. 
The contents of the front panel display appear at 
the bottom of the screen each time you operate 
this unit.

OFF

Deactivates the short message display function.

ALWAYS

Displays the OSD unceasingly during an 
operation.

10S

Turns off the OSD 10 seconds after you perform 
a certain operation.

Turns off the OSD 30 seconds after you perform 
a certain operation.

Select this to display the operation status in the 
front panel display in a continuous manner.

ONCE

Select this to display the operation status in the 
front panel display by the first 14 alphanumeric 
characters after scrolling all characters once.

Turns off the memory guard feature.

ON

Turns on the memory guard feature. While it is 

turned on (

“

”appears at the top right of the 

“SET MENU” screen), the following settings are 
protected.

– sound field program parameters
– “AUTO SETUP” items
– all speaker levels
– “MANUAL SETUP” items

Automatically detects the type of input signals 
and selects the appropriate audio input jack 
select setting.

LAST

Automatically selects the last input jack select 
setting used for the connected input source.

Automatically detects the type of input signals 
and select the appropriate decoder mode setting.

LAST

Automatically selects the last decoder mode 
setting used for the connected input source.